深圳市富克兰精密机器有限公司

工业用风冷式冷水机
Water-cooled Water Chillers
说明：
TIC-A工业用冷水机采用单级蒸汽压缩回路，并具有压缩机过载保护、泵浦过载保护、逆相缺相警示、防止节水保护、高低压力保护等装置，机器性能稳定，寿命长。可快速降温，温控稳定，满足客户要求。此系列产品主要应用冷热交换的原理进行工作。适用于现代工业中的冷却领域，且不受环境温度的影响，是不可或缺的配置设备。
The TIC-A series of water-cooled water chillers use a single closed-loop design for pressurised refrigerant。All models are equipped with compressor and motor overload protection，phase shortage and reversal alarms，anti-freeze thermostat，pressure gauges，etc。They feature excellent performance and a long lifespan。The series of working flow is based on the basic principle of heat exchange。It is applicable to the industry that requires flow of precisely controlled chilled water，and considered as indispensable equipment for modem industry。




本机特点：
1.冷却温度范围7℃-35℃；
2.不锈钢保温水箱，防结冰保护装置；
3.制冷剂采用R22，制冷效果好；
4.冷冻回路采用高、低压开关控制；
5.压缩机及泵浦均有过载保护；
6.采用意大利原装精密温控表，精度达±0.1℃；
7.操作方便，结构简单，易于维修；
8.低压泵浦为标准型配备，另可选用中压或高压泵浦；
9.可选增加配置水箱液位计；
10.采用谷转压缩机；
11.TIC-A风冷式采用套片式冷凝器，传热效果佳，散热快，无需提供冷却水；
12.改为欧规安全回路型时，机型后加注“CE”。


Features:
1.Cooling capacity from 7℃ to 35℃；
2.Stainless insulated water tank and anti-freeze thermostat；
3.R22 refrigerant used as standard for efficient cooling；
4.Refrigeration loop controlled by high and low pressure switches；
5.Compressor and pump overioad relays；
6.Italian made temperature controller maintains an accuracy of ±1℃；
7.Compact design，easy to operate and maintain；
8.Low pressure pump are standard configurations，while middleor high presure pumps are optionally availaple
9.Level meter of water of water tank is available as an option；
10.All adopt Copeland compressors；
11.TIC-A adopts tube-fin condenser design without any need of cooling water for excellent heat transfer and rapid cooling；
12.Upon request，it can be built to comply with worldwide electrical safety standards（For example:CE，UL，CSA，JIS etc）。