泊头市迅达机床平台量具有限公司

　端面铣床由以下几部分构成：Face milling machine consists of the following sections

　　1. 床身:端面铣床床身分为双矩形导轨和一矩一V合组形导轨两种，床身导轨面都经过超音频淬火处理，深度为3-5毫米，硬度为HRC-52.耐磨性能好，使用寿命长.

　　Lathe bed ：face milling machine lathe bed is divided into double rectangular guideway and a rectangular and a V composite guideway，Lathe bed guide surface get through super audio quenching processing，the depth is3-5mm，the hardness is HRC-52，the machine has excellent wearability and long life.

　　2. 工作台:工作台采用优质耐磨铸铁铸造而成，精加工后，采用手工铲刮与导轨面配铲而成。工作台的进给采用变频器，实现无级变速。

　　Worktable:worktable is made of high quality cast iron ， after finishing， adopts manual shovel scraping and guide surface scraping，worktable feed adopts frequency converter， achieve stepless variable speed.

　　立柱：立柱的导轨是采用一高一矮两条矩形导轨组合而成。其高导轨高出矮导轨55毫米，结合面积大，稳定性能高，刚性好。采用超音频淬火处理，硬度耐磨性能好。工件高度不受机床限制，可垂直上下铣削。

　　Column：column guide adopts two rectangular guideways(one is high，the other is short). the high guideway is 55mm higher than the short one， the large guide surface， high stability， good rigidity.it Is made of super audio quenching treatment， the hardness wear-resisting performance is good. Workpiece height without being limited by the machine， vertical milling，it can work in vertical way(up and down)

　　4.横向床身：横向床身是在水平面上垂直与主床身，沿垂直与主床身中心线在水平面作前后运动。具有铣削宽广的特点。由减速电机带动丝杠螺母运动。

　　Horizontal lathe bed:Horizontal lathe bed is vertical with the main lathe bed in the horizontal plane，movement(front and back) with the main lathe bed center line in the horizontal plane along the vertical. Milling is broad，the leadscrew nut is driven by a speed reducer

Botou Xunda Machine Tool CO，LTD Web site revision is completed

产品名称工作台移动端面镗铣床规格型号XD-DX0815AXD-DX0820AXD-DX1025AXD-DX1030A床身（mm）3650×758×4504650×758×4505650×758×4506650×758×450立柱（mm）650×640×2000650×640×2000650×640×2200650×640×2200工作台（mm）1500×800×2202000×800×2202500×800×2203000×800×220工件纵向行程（mm）1500200025003000立柱上下行程（mm）80080010001000纵向进给电机功率（KW）3纵向进给速度（mm）50-700升降电机功率（KW）1.5镗铣销头功率（KW）5.5KW（BS-V5型镗铣头）镗铣销头行程（mm）400镗铣销头进给电机功率（KW）0.75镗铣销头转数（rev/min）93、141、189、283．356、535(6档)推荐刀盘最大直径（mm）φ200-φ300纵向进给直线精度（mm/m）0.03立柱与工件垂直精度(mm/m)0.03机床外形尺寸（mm）        机床重量（T）6.177.098.229.13