广州中海蓄电池贸易有限公司

丰田叉车电瓶选用特殊材料铅锑配方，电池具有内阻低，自放电小，且耐过放电、过充电，循环寿命长，安全性能好等优点，适应各种环境下使用，产品规格齐全，循环次数可达1350次以上，出厂产品逐个进行严格检测，质量稳定可靠，产品性能均达到JISC、IEC及国家JB等标准，氧复合原理设计：形成内部氧循环，放电特性优异，电池内阻小，极群紧装配，完全充电状态的电池完全固定，高效率气体再化合，独特生产工艺，增强板栅抗腐蚀能力，阻燃材ABS槽壳，符合UL94V-0标准，降低壳体燃烧可能，超强的承受深放电及大电流放电能力，具有过充及过放电自我保护性能，特殊隔板能保住电解液，再同时用强力压紧正板活性物质，防止脱落，厚极板技术和独特的胶体电解质配制灌加工艺保证了电池的使用寿命，丰田叉车电瓶采用KW合金， 在板栅铸造时往铅炉加入稀土金属， 利用稀土金属的惰性特点改变板栅的晶体结构， 使电池在浮充使用过程中极板被腐蚀的状态由断面腐蚀变为表面层腐蚀， 通过减少电池极板的被腐蚀进度从根本上是电池的寿命得到延长。叉车电瓶采用薄形极板的设计， 以提高电池大电流放电的性能. 另方面为了保证电池的使用寿命， 在电池电解液加入添加剂使电池在正常使用时的浮充电流降低42%-49%， 达到减少电池内部的电化学腐蚀速度， 使电池长寿命化。丰田叉车电瓶用内部化成技术， 同时电池极板的活性物质中加入导体Pb3O4的结晶物，使电池的正极板活物质利用率提高至46%， 克服以往电池的活物质利用率低下的难题， 使电池达到高质能比。欢迎来电咨询更多叉车电瓶组配套方案。Toyota forklift battery use special materials lead antimony formula， the battery has low internal resistance， small self-discharge， resistance and over discharge， over charge， long cycle life， safety performance is good wait for an advantage， to adapt to various environments， product specification is complete， the cycles of up to 1350 times or more， the factory product carry on the strict inspection， quality stable reliable， the product performance meet the JISC， IEC and national standards such as JB， oxygen compound principle of design: the formation of internal circulation， oxygen discharge characteristic is excellent， battery internal resistance is small， very tight assembly， complete the battery charging status is completely fixed， high efficiency gas recombination， unique production process， strengthen board gate corrosion ability， flame retardant material ABS shell， accord with standard of UL94V - 0， burning may reduce shell， the deep discharge under the super and large current discharge capacity， have overcharge and over discharge protection performance， special clapboard can keep the electrolyte， and at the same time with strong compaction are active substances， prevent fall off， thick plate technology and unique gel electrolyte preparation pouring process to ensure the service life of the battery， Toyota forklift battery with KW alloy， to lead when sheeting casting furnace add rare earth metals， using the inertia characteristics of rare earth metal change the crystal structure of plate grid， the batteries used in floating plate corrosion state by section in the process of corrosion is a surface corrosion， by reducing the corrosion progress of battery plate fundamentally extend battery life. Forklift battery using thin plate design， in order to improve the large current discharge performance of battery. The other aspects in order to guarantee the service life of the battery， the battery electrolyte adding additives to make battery during normal use of floating charge flow reduced by 42% - 49%， to reduce the electrochemical corrosion speed inside the battery， the battery with long life. Toyota forklift battery with internal into technology， and join in the active material of battery plate conductor Pb3O4 JieJingWu， make the positive plate of the battery to improve the utilization of living material to 46%， and overcome the challenge of previous battery live material utilization rate is low， the battery can achieve high quality ratio. Welcome to inquire more forklift battery group matching scheme.