北京冠测精电仪器设备有限公司

如何判定测试材料需要多大电压可以击穿

How to determine the test material need much can breakdown voltage

如何判定测试材料需要多大电压可以击穿，可以通过材料的介电强度和材料的厚度来判断，一种材料的介电强度值是一定的，击穿电压值和厚度是成正比的，材料越厚，击穿电压值会越大，

How to determine the test material need much voltage breakdown， judging by the dielectric strength of the material and the thickness of the material， the dielectric strength of a material is a certain value， the breakdown voltage value and the thickness is proportional to， thicker materials， breakdown voltage value will be greater，

    介电强度是一种材料作为绝缘体时的电强度的量度.它定义为试样被击穿时，单位厚度承受的最大电压，表示为伏特每单位厚度.物质的介电强度越大，它作为绝缘体的质量越好

Dielectric strength is a material used as a measure of strength of electrical insulator. It is defined as the sample breakdown voltage， maximum thickness of affordable units， expressed as volts per unit thickness. The dielectric strength of the material， the better the quality of it as an insulator

若客户第一次做测试，还是不知道材料的介电强度，但是如何判定测试材料需要多大电压可

以击穿呢，以下我司归纳了一般材料需要的击穿强度值

If the customer to do the first time test， still do not know the dielectric strength of the material， but how to judge the test material need much voltage

以击穿呢，以下我司归纳了一般材料需要的击穿强度值

The breakdown， the Division I summarizes the breakdown strength of general material required values

DDJ-10KV(1万伏)主要用于薄膜材料，丙烯薄膜聚乙烯薄膜.聚酯薄膜，流延聚丙烯薄膜，一般厚度为1-3mm

DDJ-10KV (10000 V) is mainly used for thin film materials， propylene films of polyethylene film. Polyester film， cast polypropylene film， general thickness of 1-3mm

DDJ-30KV(3万伏)主要适用于橡胶，绝缘漆漆膜，聚氨酯，硫化橡胶等推荐可测厚度2-3mm

DDJ-30KV (30000 V) is mainly used in rubber， insulation paint， polyurethane， rubber etc. recommended measurable thickness 2-3mm

DDJ-50KV(5万伏)主要用于电缆纸，电容器纸，云母，陶瓷，推荐可测厚度为2-3mm

DDJ-50KV (50000 V) is mainly used for cable paper， capacitor paper， mica， ceramic， recommend measurable thickness of 2-3mm

DDJ-100KV(10万伏)适用于玻璃，层压材料，橡胶，树脂，推荐可测厚度为2-5mm

DDJ-100KV (100000 V) is suitable for glass， laminated materials， rubber， resin， recommend measurable thickness of 2-5mm

DDJ-150KV(15万伏) 适用于塑料、橡胶、层压材料、薄膜、树脂、云母、陶瓷、玻璃、绝缘漆等绝缘材料，推荐可测厚度为1-6mm

DDJ-150KV (150000 V) can be used for plastic， rubber， lamination material， film， resin， mica， ceramic， glass， insulating paint and other insulating materials， recommended measurable thickness of 1-6mm

电压击穿强度技术资料

Voltage breakdown strength of technical information

电压击穿强度技术软件功能:

电压击穿强度技术软件功能:

Functions of voltage breakdown strength of software technology:

    01、软件平台：WINDOWS窗口操作平台，界面直观，便于操作

01， the so