使用范围
BLD51系列隔爆型高效节能灯(以下简称节能灯)防爆性能符合GB3836.1-2000《爆炸性气体环境用电气设备 第1部分:通用要求》、GB3836.2-2000《爆炸性气体环境用电气设备 第2部分:隔爆型“d”》的规定。适用于户内、户外具有爆炸性气体混合物为Ⅱ类A、B级,T1~T4组的1区、2区场所中,在交流50HZ额定电压110V,220V线路中作照明之用。
节能灯的有关技术资料图样和样机均经国家防爆电气产品质量监督检验测试中心(CQST)审查检验合格,
Application:
BLD51 series of flame-proof HESE Lamps (Hereinafter called HESE lamp ) are designed and manufactured according to the standards: GB3836.1-2000 “ Electrical Apparatus for Explosive Gas Atmospheres Part 1: General Requirements “, GB3836.2-2000 “ Electrical Apparatus for Explosive Gas Atmospheres Part 2: Flame-proof Enclosure “d” “. They are suitable to be used in place of zone 1 or 2 where there is explosive gas mixture which belongs to category Ⅱ, class A、B, group T1~T4 for lighting in a circuit with AC 50HZ, rated voltage of 220V, 110V.
The technical drawings and documents are validated by CHINA NATIONAL QUALITY SUPERVISION AND TEST CENTRE FOR EXPLOSION PROTECTED ELECTRICAL PRODUCTS ( CQST ),2、适用条件
a) 海拔不超过2000m;
b) 周围环境温度不高于+40℃,不低于-50℃;
c) 周围空气的相对湿度不大于95%(+25℃时);
d) 在无剧烈振动或冲击的地方;
e) 在含有爆炸性气体混合物不超过Ⅱ类,A、B级,T1~T4组的1区、2区环境中;
f) 在无破坏绝缘的气体或蒸汽的环境中。
Using Conditions:
a) Altitude of the site of installation does not exceed 2000m;
b) The ambient air temperature does not exceed +40℃, the lower limit of ambient air temperature is -50℃;
c) The relative humi