上海梦鼎机械设备有限公司

Hydraulic Function: Directional Control
液压功能：方向控制
Constructive Form 结构形式: Cetop Valves / Cetop 阀
Piloting Source: Solenoids (one or two)
引导源：螺旋管（一或两个）
Control Type 控制类型: On-Off， Proportional / 开-关， 比例
Max. working temperature 最高工作温度: 50℃
Max. Pressure 最大压力: 300bar
Max. flow delivery 最大流量传送: 80lit/min.
Electric solenoids supply 电源: 0-30VDC

The machine is equipped with additional oil supply lines， therefore it is possible also to test hydraulic blocks equipped
with proportional valves or other valves.
机器装配有额外的供油管道，因此也可以测试装配有比例阀或其他阀的液压快。
The machine comes with a wide test area that is protected by the mean of a door / 机器配有广阔的测试区域，用门来进行保护
The door is equipped with lexan windows to allow the operator to see the test while running.
门安装有聚碳酸酯材质的玻璃窗，可以让操作者在机器运行时看到测试过程。
Hydraulic adapters are screwed in manually by the operator / 操作者用手动方式旋紧液压适配器
The machine has a manual lock device to firmly hold the samples under test.
机器在试验时通过一个手动锁定装置来牢牢的抓住样品。
Test data are saved and stored thanks to the PC， if required data can be printed out.
试验数据可被保存并储存到电脑中，如有需要可打印出数据。
Note: Max. Flow delivery cannot be reached at the max. pressure and the opposite (performances have to be within the installed
power 30kw) / 在最大压力下不能达到最大流量传送，相对的，必须在装机功率为 30kw 下才能实现该性能。