螺杆式空气压缩机

空压机气源系列

◆产品特点  Product features

1.  电机是特质的低转速压缩机专用电机，SKF轴承，绝缘等级F级，防护等级IP54，确保无故障运行。效率较同类产品高3-5%。

2.  油过滤器采用航空用高端材料过滤的旋装式油过滤器，效果比常规滤芯高20%，有效延长主机正常使用寿命。

3.  超大容量的油气分离器，品质优越的油气分离元件和气、液过滤元件，配以设计先进的三次油气分离，含油量控制在3ppm以下，保证压缩空气的高质量。

4.  采用具有较高的容尘能力和较低的流动阻力设计，可滤除空气中的微小固体颗粒，除尘效果达99.5%，确保系统的各个零部件的功能正常运行和经济的使用寿命。

5.  设计先进的进气阀，近期调整范围0-100%，容调阀调节，压力损失小，动作稳定，寿命长。

6.  世界顶级螺杆机、高效率、低转速，转子采用第三代5：6齿形，全球最佳的型线设计，低噪音、低耗能、低维护费用，最佳的可靠性和使用寿命。

1. Motor is characteristic of low rotation speed compressor motor， SKF bearing， special insulation is Level F， pretection class is IP54， ensure trouble-free operation. Efficiency is similar products high 3 to 5%.

2. Oil filter used in high-end materials of filter air spin loading oil filter， the effect is 20 percent higher    than conventional filter， prolong the host normal life.

3. Large capacity of the oil and gas separator， superior quality of oil and gas separation components and gas， liquid filtration components， match with advanced design of three oil and gas separation， oil content in 3 PPM， it can keep the compressed air in a high quality.

4. Design it in a higher let dust capacity and low rolling resistance， it can filter out the tiny air solid particles， dust cleaning effect of 99.5%， ensure that all parts of the system function can work well and economic service life.

5. Design is advanced into the valve， the recent adjusting range is 0 to 100%， let the valve adjust， low pressure drop， steady movement， long service life.

6. The world‘s top screw machine， high efficiency and low speed， rotor covered by use of the third class 5:6 generation of tooth shape， the world‘s bes ttype line design， low noise， low consumption， low maintenance costs， the best reliability and life.

◆主要技术参数  Main technical parameters

型号Type

DSR-10A

DSR-15A

DSR-20A

DSR-25A

DSR-30A

DSR-40A

DSR-50

排气量/排气压力

Exhaust quantity / exhaust pressure

(m3/min/Mpa)

1.2/0.7

1.7/0.7

2.4/0.7

3.1/0.7

3.8/0.7

5.2/0.7

6.4/0.7

1.1/0.8

1.6/0.8

2.2/0.8

2.9/0.8

3.5/0.8

5.0/0.8

6.1/0.8

0.95/1.0

1.4/1.0

2.0/1.0

2.7/1.0

3.2/1.0

4.3/1.0

5.7/1.0