上海航甲欧机电设备有限公司

SANTEST_GYcAT位移传感器_物位传感器 SANTEST_GYcAT-Shanghai Hangou  Mechanical And Electrical Equipment Co。，Ltd

Specifications

Thanks to the Surface Mount Technology， the entire signal
processing electronics of GYcAT series is integrated into a
transducer head.
You can get a voltage or current analog signal proportional to a
magnet position only by applying a 24V dc power supply directly to
the transducer.
GYcAT series have alarm output and head is equipped with noise
cancellation functions.

Non-linearity

< ±0.05%FS TYP

Resolution

< 0.01%FS

Repeatability

< ±0.01%FS

Temp drift

40ppm FS/°C

Voltage output

0-10V or 10-0V / (output current:Max.5mA， load:Min.2kΩ)

Current output

4-20m or 20-4mA / (load:Min.500Ω)

Alarm output

Open collector　30V　0.1A

Power supply

+24 (±2) VDC (100mA)

Frequency response

Std 1kHz (depending on stroke) sampling

Admissible press.

35MPa (probe rod)

Operating Temp

-20°C-+65°C

Storage Temp

-40°C-+80°C

Vibration

6G (or 40Hz 2mmPP)

Shock

50G (2msec)

Protection

IP65

The above mentioned accuracy applies to sensors with an effective stroke of 300mm or more.

Model No.

(1):Effective Stroke
15mm-2500mm

(2):Output
A:0-10V
B:4-20mA
C:others (bipolar etc)

(3):Direction of output
(toward probe tip)
D:output data increase
R:output data decrease

(4):Thread
M:M24xP1.0 (Standard)
N:M18xP1.5
U:3/4-16UNF

(5):Sensor rod diameter
blank:Φ10 (Standard)
8:Φ8
14:Φ13.8

(6):Cable connection
CN:Connector (Standar